Information

Yan Ka's National Standard Inspection is Finer than Embroidery-First-line Quality Inspector He Jinlian's "Hongyuan Endearance"

Release time:

2024-06-06 16:36

He Jinlian, 45, has been engaged in quality inspection for more than ten years. He is now responsible for the inspection of coating products in Hongyuan Waterproof Shandong Base. From raw materials to finished products, he is hidden in every can of products. After the coating is formed into a film, only by looking at the color and texture, experienced csi can probably know the performance of the product. behind the unique work is the result of countless experiments day and night.
 

 

The characteristics of serious, accurate and striving for perfection attract him to become a quality inspector of Hongyuan.
He Jinlian entered the waterproof industry in 2001. In the first few years in the workshop, he studied all kinds of waterproof products thoroughly. In 2005, he officially became a quality inspector. With his interest in the research and analysis of waterproof materials, his ability improved rapidly. Qianlima and Bole met in 2010-He Jinlian entered Hongyuan Waterproof and became a quality inspector.


Waterproof coating with respect to the waterproof membrane inspection is more complex, in terms of polyurethane waterproof coating, polyurethane coating is a reactive coating, the reaction time difference of one minute, will have a significant impact on the test results. Two-component polyurethane mixing after stirring have certain requirements, the direction and strength of the difference will also affect the test results.
"Hongyuan has a characteristic of pursuing perfection. From the upper leaders to the front-line employees, they are immersed in this character. They are serious, precise, and keep improving. These characteristics are too important for a person like me who loves this industry. "He Jinlian said that the quality inspection work should not stop doing all kinds of experiments, which is more meticulous than embroidery. On the surface, the same thing is repeated, but only the attentive person knows where the nuances of each experiment are.


The national standard was adjusted, and he experimented more than half a year in advance, so that there was no "transition period" for the new and old standard tests.


At the beginning of 2014, the new polyurethane standard began to be implemented. It is reasonable to say that there is a period of adaptation when the old and new standards alternate, but Hongyuan does not, because He Jinlian has been testing according to the new standard for more than half a year. "From the discussion draft of the new standard, I began to do experiments to adjust the difference between the two, so that after the new standard is officially released, there will be no" transition period "during the inspection.
At that time, He Jinlian "went with both standards" every day, but never got mixed up. While ensuring that the daily inspection will not be delayed and will be carried out according to the old standard, he takes time every day to do experiments according to the experimental environment and standards of the new standard, and analyzes the differences between these simple changes over and over again." For example, the original standard of two-component polyurethane is applied 1-3 times, and the new standard has changed the application times of film formation. I will repeatedly test the difference between one film formation, two film formation and three film formation. This difference needs to be analyzed from stable data formed by many tests."
For more than half a year of extra experiments and more than half a year of overtime work, no one asked He Jinlian to do it, and no leader asked him to prepare in advance. It was completely a spontaneous act. "This may be the characteristics of Hongyuan people. Prepare in advance and strive for perfection. It's not just me. Everyone is like this. In Hongyuan, this is a kind of self-consciousness and a kind of atmosphere."



Every can of products and every raw material shall be tested according to the national standard.
Usually, He Jinlian inspects seven or eight samples and various raw materials every day, but when he is busy, he has to test more than 20 samples a day, which is a lot of work. "Sometimes the production of all kinds of products is concentrated, and it takes more than a dozen samples to smear only. If you need to smear twice, you need to smear the dozen samples repeatedly the next day. If the samples to be inspected the next day are also more than a dozen, there will be nearly 30 samples when superimposed. Coupled with various performance inspections and raw material inspections, they often fail to eat."


When going to major testing institutions to communicate, he recorded the precautions and environmental requirements put forward by the experts one by one, and strictly implemented them after returning. He Jinlian said that the products in the workshop will be strictly inspected every day, every batch and every reactor, and every barrel of paint delivered by the workshop will pass the national standard inspection. Not only that, each raw material must be inspected separately when it enters the factory and before it is taken. "Take solvent oil as an example. Each class needs to use more than 20 barrels, and each barrel must be sampled. These more than 20 samples are tested one by one."
Csi said that the testing environment and index of Hongyuan testing room are strictly in accordance with the requirements of the national standard. "As far as paint is concerned, each can is tested, four days of film removal and seven days of testing performance to ensure that each batch of products is consistent with the national inspection standard and are all national standard products."