Product System
Integrity Responsibility Innovation Sharing
Torch-applied lapping is adopted in construction process; overburnt and underburnt condition should be avoided; it is proper until the lapping area has melting and oil flow out, with oil bleed-out width of 5-10mm.
APP
Modified Bitumen
Membranes
Plastic Modified Bituminous Waterproofing Membrane

Product Overview
The product is a waterproof membrane that is developed by using polyester felt, fiberglass felt and glass fiber reinforced polyester felt as reinforcement, using APP or APAO, APO as the modifier, and covering isolating materials such as fine sands, mineral granules (slate) and PE film on both sides.
Product Specifications
Grade
Type I Type II
Width
1000mm 2000mm
Thickness
3.0mm 4.0mm 5.0mm
Applicable to building waterproofing in high-temperature areas.
Applicable to roof waterproofing and moisture prevention of industrial and civil buildings, as well as waterproofing of bridges, culvert and parking lot.
Construction is not allowed in case of rain, snow or gale above Scale 5.
Changzhou Dinosaur Park
GAC Group
Duke Kunshan University
Duke Kunshan University
Duke Kunshan University
Sewage Treatment Plant in High-tech Zone of Qingdao
Tianjin Foxconn
Duke Kunshan University
GAC Group
Changzhou Dinosaur Park
The shale membrane and short-side lapping area should be treated with sand settling, in order to improve the adhesive strength.
The safety protection facilities for construction site and personnel should be complete; the fire-fighting equipment should be effective and placed as specified.